Candy PVK 310 Notice D'emploi page 18

INSTALLATION - BUILT-IN
The furniture in which your hob will be installed and all adjacent furniture, should be
made from materials that can withstand high temperatures. In addition, all decorative
laminates should be fixed with heat-resistant glue.
Installation:
• A watertight seal is supplied with the hob.
Before fitting :
. turn the hob upside down, with the glass surface facing downwards.
NB : Make sure the glass is protected.
. fit the seal round the hob.
. make sure that it is correctly fitted to avoid any leakage into the supporting cabinet.
Watertight seal
• Leave a gap of at least 5 cm between the appliance and the vertical sides of the
adjacent furniture.
• If, when installing the hob, the lower hob face is adjacent to an area normally
accessible when handling or cleaning, fit a partition 1 cm below the base of the hob
to avoid any risk of scorching or damage.
18 -
HOB
Hob with glass surface facing downwards
Glass surface of hob