Metrix MTX 202 Notice De Fonctionnement page 16

4000- and 6000-count TRMS digital multimeters
2.2.2 MTX 203
1
4
8
7
6
5
14
15
Dangerous voltages may be present at the input terminals and may not be displayed.
1
2
3
4
3
2
5
9
6
10
7
8
11
9
12
10
13
11
12
17
13
16
14
15
16
17
Default Auto-range.
15
Display (See §. 2.3).
Range key : operative in VAC, VDC, VLOWZ, Ω, C, AAC, ADC ranges.
Yellow key : MODE AC/DC
The AC mode is selected (default) on V and DC is selected (default) on A.
• Switch to AC or DC mode by briefly pressing the same key (short beep).
• The current mode is displayed on the LCD.
• To disable the sleep mode : hold down
• Sleep mode is disabled and symbol
Hold key :
• Holds the display on the current value and freezes it (short press).
• A second short press returns the multimeter to normal mode.
• This key is operative in all ranges (excepted NCV).
OFF : power is off.
NCV : Non Contact Voltage Detection (230V) 50 Hz
VLowZ : Low impedance voltage measurement, AC
V AC/DC : voltage measurement (10M), AC or DC
T : TK-thermocouple temperature measurement, in °C or in °F
OHM / CONTINUITY / DIODE / CAPACITANCE:
A : current measurement in A, AC or DC
mA : current measurement in mA, AC or DC
µA : current measurement in µA, AC or DC
Input terminal for AC and DC current measurement to 10A
Common (return) terminal for all measurements
Input terminal for voltage, resistance, continuity, diode, capacitance,
and temperature measurements
Input terminal for AC and DC microamps and milliamp measurements to 600mA
English
while turning the meter on.
(permanent) won't display any longer.