EINHELL NWH 2000 Mode D'emploi D'origine page 11

Anleitung_NWH_2000_SPK7:_
Cleaning the air intake filter (Fig. 4 / 5)
1. Carefully pull the air intake cover (1) upwards
using the two notch mounts (A), open the air
intake cover upwards and remove the air intake
filter (B).
2. Clean the air intake filter (B) using a vacuum
cleaner or wash it in warm water (max. 40°C).
3. Then dry the filter in a cool place.
4. Fit the air intake filter back into the equipment and
close the air intake cover again until the notch
mounts audibly click into position.
There are no parts inside the equipment which
require additional maintenance.
10. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
11. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
11.06.2010 9:47 Uhr Seite 11
GB
11