Publicité
Les langues disponibles
Les langues disponibles
Make sure that the hair is centered between the iron plates.
6. Slowly pull the unit straight towards the tips (ends) of your hair, and then
slowly loosen your grip so that you do not apply excessive pressure to the
ends, which can cause damage to hair.
7. Repeat this process, applying sufficient pressure as you pull the hair to
achieve the desired effect according to hair type.
8. Press the "SWITCH" button for 2 seconds to power-off.
9. Switch the "LOCK" and "UNLOCK" pin at the end of the unit to store
away in the heat resistant travel pouch or release for use.
In normal condition, the unit can be worked about 25 minutes.
The battery
1. The unit needs to be charged directly. When it is charging, it can't be
switched on and use for styling;
2. Directly connect the charger and the hair iron without switch it on. Plug
the adaptor into the mains.
The BLUE indicators will keep on flashing until it is fully charged in 2 hours
and half.
3. BLUE indicators are in FOUR levels to show the battery volume. Four level
display means the battery is full, while one level means battery is low.
4. The four levels mean the battery level 100%, 75%, 50% and 25%.
5. While charging, the indicator will keep flashing until it charged and
upgrade to another battery level.
If the four indicators are stable, it means the battery is full.
6. When the battery is low, the indicator of level one will keep on flashing to
inform you that the battery is low and it needs to be recharged.
7. If there is no battery, it should be recharged before switched again to use.
Very Important: When the UNIT is switched on and you plugged the
adaptor into the UNIT, it will immediately automatically switch off and
transfer to charging status.
English • 27
Publicité
