Handling; Troubleshooting - Renkforce BT-RSD1802K Notice D'emploi

Handling

• If the volume inside your car is too high, you will not hear any acoustic warning signals. This constitutes a danger
to yourself and other road users. Therefore, make sure the volume is at a suitable level.
• Inattentiveness on the road may cause serious accidents. Operation of the hi-fi system may therefore only take
place if the traffic situation permits and you are not unduly distracted by operating the system.
• Do not listen to excessively loud music over an extended period of time. This may damage your hearing.

Troubleshooting

The Renkforce BT-RSD1802K SD tuner you have purchased is equipped with state-of-the-art technology and is safe
to operate.
Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible errors here:
Always observe the safety information!
No playback, no display, and the lights are out:
• Car fuse defective. Look up the respective fuse in the operation manual of your car. Check the fuse.
• The fuse of the SD tuner is defective. Remove the SD tuner and check the fuse.
• The positive line/earth line is loose. Remove the SD tuner and check the connections of the cables.
playback only through one speaker:
• The balance control is wrongly adjusted. Adjust the balance control as described.
• The speaker connection has come loose. Remove the SD tuner and/or speakers and check the connections.
playback only through the front or rear speakers:
• The fader control is not adjusted correctly. Adjust the fader control.
• The speaker connection has come loose. Remove the SD tuner and/or speakers and check the connections.
78

Operating Instructions
English