Renkforce BT-RSD1802K Notice D'emploi page 75

Operation
Initiating a call with manual number input
• Push the button (25) at the steering wheel remote control to enter the phone mode.
• Dial the desired number with the number keys 0 to 9, * (23) and # (27) at the steering wheel remote control.
• The dialled number appears in the display.
• Push the button (25) again to dial.

Push the button
delete the last digit entered.
Push the button
number to delete the entire number.
Redial
• Press the button (25) twice to recall the last number.
• LAST NUM appears in the display.
• Push the button (25) again to call the last number dialled again.
Accepting an incoming phone call
• Press the button (25) to accept an incoming phone call.
• Push the button
Ending a phone call
• Push the button
Call handover
• During a phone call, push the button DSP / TA /
or the hands-free system.
/ BND / LOU (20) or BND / AMS /
/ BND / LOU (20) or BND / AMS /
/ BND / LOU (20) or BND / AMS /
/ BND / LOU (20) or BND / AMS /
(11) briefly while entering the number to
(11) for a longer time while entering the
(11) to reject an incoming call.
(11) to terminate a call.
(2) for a longer time to hand over the call to the mobile phone
75