Connection Of The Speakers And The Power Supply - Renkforce BT-RSD1802K Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Electric Connection
Operating Instructions
English

Connection of the Speakers and the Power Supply

Vehicles equipped with an ISO plug can be connected directly to the ISO connection terminal if the plug assignment
is the same (please check beforehand!). If the plug assignment differs, use a vehicle-specific adapter from a vendor
for connection.
Please refer to the following figures for the contact assignment of the ISO connection socket of the SD tuner.
Please ask your car dealer for the respective assignment of your vehicle system plug.
System connector B (speaker connection)
(1) Speaker rear right (+)
(2) Speaker rear right (-)
(3) Speaker front right (+)
(4) Speaker front right (-)
(5) Speaker front left (+)
(6) Speaker front left (-)
(7) Speaker rear left (+)
(8) Speaker rear left (-)
System plug A (power supply)
(1) (Not assigned)
(2) (Not assigned)
(3) (Not assigned)
(4) Continuous current +12V
(5) Aerial control output
(6) (Not assigned)
(7) Ignition +12V
(8) Ground
56

Publicité

Table des Matières

Dépannage

loading

Produits Connexes pour Renkforce BT-RSD1802K

Ce manuel est également adapté pour:

37 42 25

Table des Matières