Renkforce BT-RSD1802K Notice D'emploi page 67

Operation
Button functions
• BND / AMS button (11)
Briefly push this button to select the band range of the radio unit.
There are 3 FM areas and one AM area available:
F1 > F2 > F3 > AM

On each of the four band ranges, 6 stations can be stored on the station buttons 1-6 (15).
Keep this button pushed to activate automatic station search. SEARCH flashes in the display.
All stations that can be received well are automatically stored for the station buttons 1-6 (15).
After this procedure, the stored stations are played for a few seconds.
•  (8) and  (1) buttons
With these buttons the receiving frequency can be changed to adjust stations in radio operation.
Briefly pushing a button starts the automatic station search (display shows SEARCH).
The auto-scan only stops at the next station that can be received well.
By pushing a button longer, you activate manual station scan.
The display shows MANUAL.
In this mode, the frequency is changed until you release the corresponding button again. Brief pushes of this button
changes the frequency step by step.

If buttons are not pushed for an extended period of time, the devices switches back to automatic station
search. The display shows AUTO.
67