Connecting The Aerial; Connecting The Line Outputs; Aux In Connection; Hands-Free Microphone Connection - Renkforce BT-RSD1802K Notice D'emploi

Electric Connection

Connecting the Aerial

• Connect the aerial plug of your vehicle with the aerial socket at the back of the radio (socket next to the cinch
terminals).
• If your vehicle has a different aerial plug, please use a suitable adapter, available in specialist shops.

Connecting the LINE Outputs

The SD tuner has LINE outputs for connecting a power amplifier.
For the connection of the cinch sockets only use the shielded cinch wires. Use of any other
cables may cause interferences.
Keep the distance of the cables as short as possible.
Do not place the cables near other cables to avoid interferences in the cables.
To avoid distortions or mismatching that could damage the device, cinch connector must only
be connected to devices with the suitable cinch terminals. For this, observe also the connection
information in the section "Technical Data".
• Connect the cinch sockets at the rear of the casing to the power amplifier inputs.

The red socket is a terminal for the right channel
The white socket is a terminal for the left channel

AUX IN Connection

You can connect an external audio device (e.g. portable MP3 player) to the port AUX IN (4) whose signal is played
back via the vehicle speakers.
• Connect the port AUX IN (4) with the audio output of the external device.

Hands-Free Microphone Connection

• Connect the plug of the hands-free microphone to the coupling of the black connection line at the back of the
device.
55