Publicité
Les langues disponibles
Les langues disponibles
Channel function
CH1
dimmer
CH2
dimmer
CH3
dimmer
colour
CH4
macros
speed
CH5
strobe
CH6
mode
CH7
dimmer
8. Cleaning and maintenance
•
All screws should be tight and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections ...
•
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
•
Regularly remove dust from the housing and the air vents using a slightly damp cloth.
•
There are no user-serviceable parts inside. Refer to an authorized dealer for service and/or spare
parts.
9. Technical specifications
power supply
power consumption
light source
dimensions
total weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
17.01.2011
DMX-512
value
000 ~ 255
0% ~ 100%
000 ~ 255
0% ~ 100%
000 ~ 255
0% ~ 100%
000 ~ 015
no function
colour macros (overrides CH1, CH2, CH3 setting)
016 ~ 255
000 ~255
slow ~fast (when CH6 = 32 ~ 223)
000 ~ 015
no function
016 ~ 255
slow ~fast (when CH4 = 016 ~ 255 or CH1, CH2, CH3 <> 000)
000 ~ 031
RGB mode (CH1, CH2, CH3)
032 ~ 063
pulse 0 ~ 100% (CH1, CH2, CH3)
064 ~ 095
pulse 100 ~ 0% (CH1, CH2, CH3)
096 ~ 127
pulse 100 ~ 0 ~ 100% (CH1, CH2, CH3)
128 ~ 159
auto fade transition
auto snap transition – 3 colours
160 ~ 191
192 ~ 223
auto snap transition – 7 colours
224 ~ 255
sound triggering mode
000 ~ 255
0% ~ 100% (when CH4 = 016 ~ 255 or CH1, CH2, CH3 <> 000)
240VAC ~ 50HZ
11W
1x high-power 10W LED, tri-colour
260 x 100 x 100mm
1.0kg
VDPL110CC
Control Programs
red
green
blue
6
Rev. 01
speed controlled by
CH5
©Velleman nv
Publicité
