Helios EcoVent Verso KWL EC 45-160 Notice De Montage Et D'utilisation page 20

Installation and Operating Instructions
EN
ATTENTION
ATTENTION
Unit with inner panel – KWL EC 45-160
3. Disconnect the connector plug (part
4. Wire the connection cable (external diameter max. 6 mm) according to the wiring diagram.
Connection plug
ò
Connection cable on-site
Connection Unit
5. Connect the connection plug and plug into the opening on the unit (see Fig. 10)!
Pressing the fan protection grille will damage the unit!
Insert the unit on the fan casing into the wall mounting sleeve.
6. Insert the unit into the wall mounting sleeve until contact is made with the facade panel (see Fig. 11).
Opening
Connection plug
Connection cable not shown!
INSTALLATION STEP 3:
– Inner panel
The inner panel is completely open upon delivery and the outlet opening is at the top (see Fig. 12).
Pressing the inner panel will damage the connection cable!
Carefully insert the inner panel into the wall mounting sleeve and do not pinch the connection cable.
1. Insert the inner panel (open) into the wall mounting sleeve (see Fig. 12).
Outlet opening top
Inner pabel
ò from ù ) (see Fig. 9).
ù
Fig .10
Fig .12
7
Fig .9
Fig .11