Publicité
Les langues disponibles
Les langues disponibles
EN
SWITCHABLE LASER LINES AND LASER POINTS
The laser points rotate 360° around their vertical axis.
MANUAL FUNCTION
If the instrument is in OFF position press the button MANUAL function to enter into the MANUAL
mode; the ON/OFF LED is illuminated, the MANUAL LED is blinking. Now the instrument can be used
in slope mode, the compensator alarm is off. All lines and points can now be switched as described
below. Switch off the MANUAL function with this button.
USE WITH RECEIVER
To prolong the working range or at unfavourable light conditions CrossPointer5 GREEN SP can be
used with an optional receiver (not included in this kit).
Switch on the desired laser lines and press the button receiving mode at CrossPointer5 GREEN SP
(the LED for the corresponding lines flashes).The selected laser lines can now be deteced by the
receiver (the visibility of the laser lines is weaker in this mode).
By use of the receiver the working range can be extended up to 80 meters. For more detailed infor-
mation please see the user manual of the receivers.
Press the button receiving mode again to quit this mode.
14
Publicité
