geo-FENNEL Selection PRO CrossPointer5 GREEN SP Mode D'emploi page 13

KEYPAD
1. ON/OFF LED
2. Button laser lines
3. Receiving mode LED
4. Button laser points
5. MANUAL function LED
6. Button receiving mode / MANUAL function
OPERATION
Setting up the laser:
1. on the floor
2. connect the laser to the mount supplied with the kit and connect it to a tripod
3. fix the magnets of the mount onto a magnetic surface (steel plate)
4. set up the laser in a hanging position by means of the hole of the mount
5. conncet the laser to a column by means of the fixing strap
POWER ON
Power on the laser by turning the ON/OFF knob in position ON. The instrument is now ready for
use. An audible and optical (blinking lines) alarm indicates if the instrument was set up outside its
compensator range. Set up the instrument on a more even surface.
To power the instrument off turn the ON/OFF knob back to the OFF position.
The instrument is now powered off.
NOTE:
During transport the ON/OFF knob (compensator lock) must be set to
OFF . Disregard may lead to damages of the compensator.
1
2
4
EN
3
5
6
D
13