Princess 492900 Mode D'emploi page 9

- the appliance or the mains cable is damaged
- any defect after the appliance has accidently dropped or something similar is suspected. In these cases have the
appliance repaired.
• Disconnect the appliance in these situations:
- any malfunction during operation
- prior to cleaning and maintenance
- after use.
• Do not immerse the appliance in water.
• In the case of misuse, wrong handling or incorrect repair no liability will be taken for possible damages. Claims
under guarantee are also excluded in such cases.
• The appliance is not designed for commercial purposes.
• In case the cord of this appliance is damaged, it has to be replaced by an authorised service agent of the manufac-
turer or a person having similar qualifications. Substantial dangers for the user can appear from inappropriate
repairs. Putting into operation. Connect the appliance to a socket. By turning the sharpening head
adjust the desired working position. The sharpening head locks into place perceptibly, when the mar-
king of a symbol is turned towards the top. For starting the appliance press the button. The
starting noise of the motor is due to technical reasons and no reason for concern.
SHARPENING PROCEDURES
Only sharpen clean objects. Move all knives and scissors under slight pressure in one fluent move-
ment towards your body during the sharpening operation. Never move in both directions. Repeat
this procedure until the desired degree of sharpness has been obtained. The quality of the sharpening
procedure is primarily dependent on the quality of the steel. Always sharpen knives and scissors
about the whole length in order to avoid deformations. Strong pressure and tilting the tools block the
grinding disc. In this case start the sharpening operation once again.
9