Operating Modes (Auto/Manu/Holiday); Boost Function - eQ-3 MAX! Mode D'emploi

• Once the factory settings have been restored success-
fully, "rES" is displayed.

10. Operating modes (Auto/Manu/Holiday)

To sw itc h bet we en o p er at ing m o de s, p re s s and
immediately release the Auto/Manu button (the operating
modes only become available for selection once installa-
tion is complete).
• Manu: Manual operation - the temperature set manually
using the handwheel is maintained permanently.
• Auto: Weekly program - automatic temperature regulation
in accordance with the time profile saved (heat/reduce).
• Holiday (
maintained up to an end time, at which point the device
switches to automatic mode. Can only be deactivated
on the radiator thermostat; activation is via a gateway
(e.g. MAX! Cube).
If the operating mode is changed on one device in
a room, this change is applied on all radiator
thermostats assigned to that room.
The boost function makes use of human sensations of heat.
When the function is activated, the heating valve opens im-
mediately for 5 minutes at 80% (factory setting).
You can feel the heat from the radiator immediately and
at the end of the 5 minutes, the room continues to heat
up. If you arrive home earlier than usual and want to heat
the room up quickly, or you need some extra heat in the
morning after a shower, then the boost function will help
you with this.
36
): In holiday mode, the set temperature is

11. Boost function