Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
RSP-1069 Surround Sound Processor
Dolby Digital 5.1 discs
Dolby Digital Surround EX
discs
Dolby Digital decoding is auto-detected and
cannot be overridden. You may, however,
select a 2 channel downmix of 5.1 channel
recordings. In a 6.1 ch or 7.1 ch system, you
can also choose Dolby Surround EX, Dolby
Pro Logic IIx Music, Dolby Pro Logic IIx Cin-
ema (7.1ch only), or Rotel XS processing for
center back channels.
: In addition to the options that follow, you
NOTE
can press the 2CH button on the front panel
or the remote to toggle between 2-channel
downmix and multichannel playback.
• On a 5.1 system. Press the SUR+ but-
ton on the remote, then press the +/– but-
tons to change between DD 5.1 channel
or DD 2.0 channel downmix playback.
• On a 6.1 system. Press the SUR+ button
on the remote, then use the +/– buttons to
step through fi ve options: DD 2.0 channel
downmix, DD 5.1 channel, DD Surround
EX center back processing, DD with Pro
Logic IIx Music center back processing
or DD with Rotel XS center back process-
ing. You should typically select Surround
EX or discs that are labeled Dolby Digital
Surround EX. For standard 5.1 channel
discs, Dolby Pro Logic IIx Music or Rotel
XS processing will provide a more diffuse
surround effect than the more highly local-
ized Dolby EX decoding and will prob-
ably be the better 6.1 channel options
for non-Surround EX discs. Selecting DD
5.1 forces the center back channel pro-
cessing off for conventional 5.1 channel
playback. You can also repeatedly press
the DOLBY PLIIx Mode button on the front
panel until the desired center back chan-
nel option is selected.
• On a 7.1 system. Press the SUR+ button
on the remote, then use the +/– buttons to
step through six options: DD 2.0 channel
downmix, DD 5.1 channel, DD Surround
EX center back processing, DD with Pro
Logic IIx Music center back processing,
DD with Pro Logic IIx Cinema back chan-
nel processing, or DD with Rotel XS center
back processing. You should typically se-
lect Surround EX or discs that are labeled
Dolby Digital Surround EX. For standard
5.1 channel discs, Dolby Pro Logic IIx Mu-
sic or Rotel XS processing will provide a
more diffused surround effect than the
more highly localized Dolby EX decoding
and may be the better 7.1 channel options
for non-Surround EX discs. Selecting DD
5.1 forces the center back channel pro-
cessing off for conventional 5.1 channel
playback. You can also repeatedly press
the DOLBY PLIIx Mode button on the front
panel until the desired center back chan-
nel option is selected.
: When playing any Dolby Digital
NOTE
source, you can select one of three dynamic
range control settings. See the Dynamic
Range topic in the Other Settings section of
this manual.
Dolby Digital 2.0 discs
Dolby Digital decoding is auto-detected and
cannot be overridden. You may, however, se-
lect 2-channel playback, 5.1 channel play-
back with Pro Logic II matrix surround, 6.1/7 .1
channel playback with Pro Logic IIx matrix
surround, or Dolby 3-Stereo playback.
• On a 5.1 system. Press the SUR+ but-
ton on the remote, then use the +/– but-
tons to step through four options: DD 2.0
channel, DD with Pro Logic II Cinema ma-
trix surround, DD with Pro Logic II Music
matrix surround, or Dolby Digital 3 chan-
nel stereo. You can also repeatedly press
the 2CH button on the front panel or the
remote to select the same options.
• On a 6.1/7.1 system. Press the SUR+
button on the remote, then use the +/– but-
tons to step through four options: DD 2.0
channel, DD with Pro Logic IIx Cinema ma-
trix surround, DD with Pro Logic IIx Music
matrix surround, or Dolby Digital 3 chan-
nel stereo. You can also repeatedly press
the 2CH button on the front panel or the
remote to select the same options.
• To select Cinema or Music options in
Pro Logic II or Pro Logic IIx modes.
Press the SUR+ button twice while in Pro
Logic II or Pro Logic IIx modes. Then, use
the +/– buttons to select the Music or Cin-
ema options.
: When playing any Dolby Digital
NOTE
source, you can select one of three dynamic
range control settings. See the Dynamic
Range topic in the Other Settings section of
this manual.
32
DTS 5.1 discs
DTS 96/24 discs
DTS-ES 96/24 discs
DTS-ES 6.1 discs
DTS decoding is auto-detected and cannot
be overridden. You may, however, select a
2 channel downmix of 5.1 channel record-
ings or add Rotel XS center back processing
for 5.1 channel discs.
: In addition to the options that follow,
NOTE
you can press the 2CH button on the remote
to toggle between 2-channel downmix and
multichannel playback.
• On a 5.1 system. Press the SUR+ but-
ton on the remote, then press the +/– but-
tons to change between DTS 5.1 channel
or DTS 2.0 channel downmix playback.
• On a 6.1/7.1 system with a DTS
5.1 disc. Press the SUR+ button on the
remote, then use the +/– buttons to step
through the optional modes: DTS 2.0
channel downmix, DTS 5.1 channel, DTS
with Rotel XS center back processing, DTS
with Pro Logic IIx Music center back pro-
cessing, or DTS with Pro Logic IIx Cinema
center back processing (available only
for 7.1 channel systems). Selecting DTS
5.1 forces the center back channel pro-
cessing off for conventional 5.1 channel
playback. You can also repeatedly press
the DTS Neo:6 button on the front panel
until the desired option is selected.
• On a 6.1/7.1 system with a DTS-ES
disc. Press the SUR+ button on the remote,
then use the +/– buttons to step through
three optional modes: DTS 2.0 channel
downmix, DTS 5.1, or DTS-ES 6.1ch/7.1ch
playback. On the front panel, press the DTS
Neo:6 button while playing a DTS source
to step through the same options.
• On a 6.1/7.1 system with a DTS
96/24 or DTS-ES 96/24 disc. Press
the SUR+ button on the remote, then use
the +/– buttons to step through the optional
modes: DTS 2.0 channel downmix, DTS
96, or DTS 96 with Rotel XS center back
processing. You can also repeatedly press
the DTS Neo:6 button on the front panel
until the desired option is selected.
Publicité
Chapitres
Table des Matières
