Bosch Performance Line PowerPack 300 Notice Originale page 31

OBJ_BUCH-2272-001.book Page 4 Thursday, July 17, 2014 2:25 PM
Initial Operation of the On-board Computer
The battery pack is supplied partially charged. Before the first
use, the Nyon battery pack must be fully charged via the USB
port (see "Energy supply of the on-board computer", page
English–7) or the eBike system.
In order to use all the features of the operating system, you
must also register online.
Registration at the On-board Computer
– Switch on the on-board computer using the On/Off but-
ton 5.
– Use the joystick 1 to select your preferred language (select
by pressing the joystick) and follow the instructions.
You have the following options to put Nyon into operation:
– "Test Ride"
You can perform a test ride without having to register in ad-
vance or to enter data. After shutting down, all trip data will
be deleted.
– "Start Demo"
A self-running sequence performs the main features of
Nyon, including Dashboard, Ride screen, Navigation, and
Fitness screen. Several values are simulated. The demo
mode starts again after about 2.5 minutes and can be ter-
minated at any time by pressing any key.
– "Continue without account setup"
This is a very short registration process limited to Nyon.
Offline means in this case that your journey and user data
are only saved locally on the on-board computer.
Follow the instructions and choose one of the suggested
answers. Entered data is kept after shutting Nyon down,
but will not be synced to the online portal or smartphone
application.
– "Create a new account or use existing >
Setup via smartphone"
This is a complete registration process. Insert Nyon in the
holder 4, download the application "Bosch eBike Connect"
to your smartphone and register using the application. Fol-
lowing registration, the journey data are stored and syn-
chronized with the smartphone application and the online
portal.
– "Create a new account or use existing >
Setup via Wi-Fi"
This is a complete registration process. Connect Nyon via
USB to a power supply (e.g. computer) and ensure you are
in a WLAN network access area. Nyon then connects to the
WLAN network of your choice and you will be directed to
the online portal "www.eBike-Connect.com" where you
can carry out the registration. Following registration, the
journey data are stored and synchronized with the online
portal. A connection to your smartphone can then be cre-
ated from your Nyon ("Settings">"Connections"> "Con-
nect new smartphone").
Bosch eBike Systems
Registration via smartphone and Bluetooth® connection
A smartphone is not included in the delivery. To register with
the smartphone internet connection is required, which,
depending on the contract, can generate costs at your tele-
phone provider. For the synchronization of data between the
smartphone and online portal an Internet connection is also
required.
To make use of the full functionality of your on-board comput-
er, you need a smartphone with the Android operating system
version 4.0.3 or higher or iOS 7 and higher. A list of test-
ed/approved smartphones, can be found in the online manual
under "www.Bosch-eBike.com/nyon-manual".
Smartphones with the above mentioned operating systems,
which are not included in the list can be connected under cer-
tain circumstances with the on-board computer. However, a
complete compatibility of the on-board computer with the
smartphones not listed, can not be guaranteed.
Download the application "Bosch eBike Connect" to your
smartphone from the Appstore for Apple iPhones and Google
Play Store for Android devices.
Start the application "Bosch eBike Connect" and follow the
instructions. Detailed instructions can be found in the online
manual under "www.Bosch-eBike.com/nyon-manual".
If the application "Bosch eBike Connect" is active and there
is a Bluetooth ® connection to your on-board computer, data
between on-board computer and smartphone will sync auto-
matically.
Online registration
Internet access is required for online registration.
Open the online portal "Bosch eBike Connect" with your
browser under "www.eBike-Connect.com" and follow the
instructions. Detailed instructions can be found in the online
manual under "www.Bosch-eBike.com/nyon-manual".
Displays and configurations of the on-board
computer
Operating logic
For security reasons, Nyon does not have a touch screen. A
change in the display can be achieved during the journey via
the operating unit 11. This way both hands can stay on the
handlebars while cycling.
With the control elements on the on-board computer, you
have the following options:
– Switch the on-board computer on or off using the On/Off
button 5.
– The default mode of operation in "Settings > My Nyon"
can be reached via the "Home" (2 or 13) button.
– The bike lights can be switched on or off using the bike light
button 6.
English–4
0 276 001 SPN | (17.7.14)