Télécharger Imprimer la page

Weelko MOVE P06 Mode D'emploi page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CAUTIONS
Consult your healthcare professional
before using the Move Portable Rotary
Brush if you are currently under the care
of a doctor for a skin conditions.
Contraindications
Do not use the device if you:
- Have heightened skin allergies
- Are sunburned
- Have open wounds
- Recently underwent a chemical peel
- Undergoing microdermabrasion treat-
ment
- Are currently taking any medications
that can cause skin sensitivity
- Recently underwent facial cosmetic
surgery
- Have acne, serious skin condition or
infection
- DO NOT use the device on young chil-
dren
If any of these conditions concern you,
please consult your healthcare profes-
sional before using this device. We re-
commend not sharing the applicators
with other users for hygienic purposes.
OPERATION
Before use:
1.
The unit is powered by 4pcs AA
batteries. Batteries are not included. For
a longer running time, it is recommended
to use alkaline batteries. Please make
sure that the unit and your hands are dry
when inserting the battery.
2.
Use one hand hold the unit
downward while the other hand holds the
battery cover at the "open" mark posi-
tion.
3.
Pull the cover with a strong pull.
EN
Note: Please squeeze and pull the cover
firmly to detach it from the unit. The co-
ver may feel very tight on the unit. There
is a rubber seal to prevent water from
entering the unit. This is also to prevent
moisture from getting in.
4.
Insert 4pcs AA batteries.
Note: match batteries +/- symbols with
the +/- marks on the main unit.
5.
Close the cover by aligning the co-
ver with the unit and snapping the cover
into the unit.
During use::
1.
For better results, use a headband
to keep your hair away from your face.
2.
Attach any brush attachment to
the main unit and press the power but-
ton to begin use.
3.
Choose rotational direction, press
the power button 1.5 seconds, the unit
will rotate to different direction.
4.
Choose appropriate rotational
speed, when the unit turns on, press the
button "S" to change the speed from
High speed > Middle speed > Low speed >
High speed.
Note: The unit will start to work with the
same speed and the same rotational
direction as when it was turned off last
use.
5.
Intelligent motor protection sys-
tem: When the unit turns on and the
brush head gets stuck for about 30 se-
conds, the unit will turn off automatically
to protect itself.
© 2020 Weelko
www.weelko.com
Importer: Weelko Barcelona, S.L.
ESB65397556

Publicité

loading