Télécharger Imprimer la page

shark SC507C Guide D'utilisation page 11

Publicité

FAMILIARISEZ-VOUS AVEC VOTRE NETTOYEUR À
VAPEUR
14
b
a
1. Appareil
2. Bandoulière
3. Poignée
4. Témoin d'alimentation (rouge)
et de vapeur (vert)
5. Capuchon de sécurité
6. Cordon d'alimentation
7. Boyau souple
8. Poignée
Spécifications techniques
Tension :
115 V, 60 Hz
Intensité :
1500 watts
Capacité :
27 onces (US) (800 ml)
Génératrice à vapeur :
Acier inoxydable
*Les illustrations peuvent différer du produit lui-même.
16
9. Détente de vapeur
10. Verrou de la détente de vapeur
11. Bouton de verrouillage
12. Contrôle de vapeur variable
13. Raclette
14a.Cadre de pochette à vapeur
14b. L'adaptateur d'angle
15. Serviette de pochette à vapeur
16. Tubes de rallonge (x2)
17. Entonnoir
18. Concentrateur
19. Brosses à soies de nylon (x2)
TIPS ON HOW TO USE YOUR SYSTEM
Care and Maintenance
If you consistently use demineralized or
distilled water, cleaning the tank is
unnecessary.
Rinsing Out the Steam Cleaner
Normally, a periodic rinse of your steam
cleaner will free it from deposits. This is
recommended every 10-15 tankfulls, to
free up any scale deposits from the tank.
Fill the boiler with 20 oz. of water and
shake the cleaner vigorously. Tilt the
cleaner upside down to empty the boiler of
water and any scale deposits.
Descaling Your Steam Cleaner
If the tap water in you area contains a high
level of calcium deposits and you have
been using tap water to do your steam
cleaning, you should descale your unit
after 10-15 tankfulls.
To Descale the Steam Cleaner
Step 1:
Unplug the steam cleaner from
the power source before you
descale the boiler. Allow to cool.
Step 2:
Fill the boiler with 1 part
vinegar and 5 parts water and
leave overnight or for a period
of approximately 8 hours. Do
not screw the safety/filler cap
onto the steam cleaner while
you are descaling the boiler.
Do not use the steam cleaner
while descaling solution is
inside the boiler.
Step 3:
After the period of soaking, turn
the steam cleaner upside down
to empty solution from the
boiler. Due to the fact that a
small amount of solution will be
left in the boiler, it is necessary
to rinse the boiler out with clean
water 2 or 3 times. Your steam
cleaner is now ready for use.
NOTE:
When storing your unit,
always drain any residual water in the
boiler and do not tighten the safety
filler cap onto the unit. Always leave
the safety filler cap loose on the unit
when not in use.
Water
Use tap water for all your cleaning
needs.
However, if you live in an area with
hard water, use de-mineralized /
distilled water when steaming light
colored fabrics to eliminate the
possibility of hard water stains.
IMPORTANT:
Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the water used in
this appliance. Use tap water or
distilled/purified water if the tap
water in your area is very hard.
Efficient Work
For vertical surfaces, wipe with a
towel from the top down, in this
way the dirty water will not soil
surfaces already cleaned.
Avoid changing brushes back and
forth while cleaning.
Start with the smallest brush to
clean tight spots and corners first.
Use a towel to wipe dirt as soon as
possible, otherwise it will dry and
re-adhere to the surface.
9

Publicité

loading