Güde GH 2800 Traduction Du Mode D'emploi D'origine page 15

Operator requirements
The operators must thoroughly read operation manual
before use.
Qualification
Except for thorough training by an expert for use of the
device, no special qualification is required.
Minimum age
The device may be operated by persons over 16 years of
age. An exception is use by younger person if the use
takes place under supervision of an adult trainer in the
course of education.
Training
Use of the device requires corresponding guidance by an
expert or operation manual only. No special training is
required.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
Maintenance and storage
Keep the air hole and body free from dust and dirt.
Use soft cloth and fine soap solution for cleaning. Avoid
direct contact of the appliance with aggresive cleaning
agents. Do not use aggresive, volatile or caustic products.
Have your electric garden waste shredder inspected
annually by a qualified authorized specialist.
Protect the appliance against moisture and dust.
If not used for a longer period of time, store covered on
dry, safe place not accessible to children.
Troubleshooting
The table shows potential failures, their possible cause
and remedies. Call your specialist if you can not tackle
with the trouble.
Turn off and unplug the appliance before
maintenance and cleaning.
Electric shock hazard.
Symptom Possible cause
Appliance Collection box not
does not inserted properly
run
Filling hopper not
assembled correctly
Defective socket
Extension cable
damaged
Safety feature
activated
Overload safety
feature activated
Shredded Shredded material
material is wet and soft
not drawn
in
Shredded material
clogged in the
appliance
Remedy
Insert the collection box
properly
Assemble the filling
hopper correctly
Use other socket
Check or replace the
cable
Replace
Press overload safety
feature button (Fig. A/2,
Fig. E/1) and remove
clogging according to
description in chapter
"Operation".
Use pusher to draw the
shredded material in the
appliance
Remove clogged
shredded material
(always wear safety
gloves)
Press reverse operation
button or remove
clogging according to
description in
"Operation".