Configuration Of Needle Thread Heat Cutter Unit; Configuration Of Bobbin Thread Heat Cutter Unit - JUKI LK-1942ZA5050 Manuel D'utilisation

3. Configuration of needle thread heat cutter unit

❶
❷
❸

4. Configuration of bobbin thread heat cutter unit

❶
❶ Sensor head
❷ Bobbin case holder positioning finger
❸ Bobbin thread trimmer cylinder
❹ Bobbin thread heat cutter unit
❺ Cover open/close detection switch
❶ Temporary stop switch
❷ Needle thread trimmer cylinder
❸ Needle thread heat cutter unit
❹
❷
– 3 –
The figure shows the needle thread
heat cutter with its cover removed.
For the sake of safety, be sure to use
the needle thread heat cutter with its
cover attached.
❸
❺
The figure shows the needle thread
heat cutter with its cover removed.
For the sake of safety, be sure to use
the needle thread heat cutter with its
cover attached.