Publicité
Les langues disponibles
Les langues disponibles
Ssang Yong Korando
1997 - 1998
Ref. 1082
Fitting instructions
1)
Place mounting piece (f) at the back in the cross-profile with points (A) and (B) on the existing holes.
Insert the bolts.
2)
Place the tow bar with points (A) against the bottom of the cross-profile on point (A) of the mounting
piece and points (C) and (D) in between the chassis.
Drill the points (D) through the chassis with ø10,5mm and insert the washers on the outside. Insert all
bolts and place the mounting pieces (e) on the outside on points (C).
Tighten everything firmly.
3)
To reduce a possible play in between the chassis and the tow bar, you can insert mounting pieces (g) with
points (C) and (D) in between the tow bar and the chassis.
4)
Install the (*) and also tighten firmly.
Publicité
