Using The Total Crushing Pitcher - Ninja BN642 Guide D'utilisation

USING THE TOTAL CRUSHING® PITCHER
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: Pre-set programs have pauses
and changes in speed throughout the
cycle.
NOTE: DO NOT add ingredients
before completing installation of the
Stacked Blade Assembly.
NOTE: The pitcher can only be
installed in one orientation. The
handle must be positioned on the
front-right corner of the motor base
to operate the appliance.
TIP: If the Stacked Blade Assembly is
not fully seated, you will not be able to
install and lock the lid.
TIP: To learn more about the unit's
programs, refer to previous page.
1 Place the unplugged motor base on a
clean, dry, and level surface such as a
countertop or table. Press downward on
the motor base to adhere the suction cups
to the work surface. Plug the motor base
into a wall outlet.
12 ninjakitchen.com
2 Lower the Total Crushing Blender pitcher
onto the motor base. The handle should
be aligned slightly to the right and the
pitcher should be oriented so the LOCK
symbols are visible on the motor base.
Rotate the pitcher clockwise until it clicks
into place.
3 Exercising care, grasp the Stacked Blade
Assembly by the top of the shaft and
place it onto the drive gear inside the
pitcher. Note that the blade assembly
will fit loosely onto the drive gear.
4 Add ingredients to the pitcher. DO NOT
add ingredients past the MAX LIQUID line
on the pitcher.
5 Place the lid on the pitcher, aligning
the triangle symbol located on the lid
with the triangle symbol located on
the pitcher's handle. Press down on
the handle until it clicks into place. The
triangle symbols MUST be aligned for
the lid to lock onto place and for the unit
to operate. When the unit is connected
to power and the container is correctly
locked onto the motor base, press
the Power symbol to turn unit on. The
available program buttons will illuminate
and the unit will be ready for use.
6 If using a pre-set program, first select the
program that best suits your recipe. The
pre-set feature will automatically stop
the appliance at the end of the program.
To pause the unit at any time, press the
currently active button a second time.
Refer to page 11 for program descriptions.
7 If not using a pre-set function and
ingredients have reached your desired
consistency, stop the appliance by
releasing the manual speed button,
and wait for the appliance to come to a
complete stop.
8 To remove the pitcher from the motor
base, turn the pitcher counterclockwise
and then lift it.
ninjakitchen.com
13