Ninja BN642 Guide D'utilisation page 4

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�
28 NEVER leave the appliance
unattended while in use.
29 DO NOT blend hot liquids. Doing so
may result in pressure buildup and
steam exposure that can pose a risk
of the user being burned.
30 DO NOT process dry ingredients
without adding liquid to the
Single-Serve Cup. The Single-Serve
Cup is not intended for dry blending.
31 DO NOT perform grinding operations
with the Single-Serve and Pro
Extractor Blades Assembly.
®
32 NEVER operate the appliance
without lids and caps in place. DO
NOT attempt to defeat the interlock
mechanism. Ensure the container
and lid are properly installed before
operation.
33 Before operation, ensure all utensils
are removed from containers.
Failure to remove utensils can cause
containers to shatter and potentially
result in personal injury and property
damage.
34 Keep hands and utensils out of
container while blending to reduce
the risk of severe injury to persons
or damage to the blender. A rubber
scraper or spatula may be used
but must be used ONLY when the
blender is not running.
6
ninjakitchen.com
35 DO NOT open pour spout cap while
blender is operating.
36 If you find unmixed ingredients
sticking to the sides of the pitcher,
stop the appliance, remove the
lid, and use a spatula to dislodge
ingredients. NEVER insert your hands
into the pitcher, as you may contact
one of the blades and experience a
laceration.
37 DO NOT attempt to remove the
container or lid from the motor
base while the blade assembly is
still spinning. Allow the appliance
to come to a complete stop before
removing lids and containers.
38 If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool for
approximately 30 minutes before
using again.
39 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience
damage.
40 Upon completion of processing,
ensure that the blade assembly
is removed BEFORE emptying
container's contents. Remove the
blade assembly by carefully grasping
the top of the shaft and lifting it from
the container. Failure to remove the
blade assembly before emptying
the container results in a risk of
laceration.
41 Remove the Pro Extractor Blades
Assembly from the Single-Serve
Cup upon completion of blending.
DO NOT store ingredients before or
after blending them in the cup with
the blade assembly attached. Some
foods may contain active ingredients
or release gases that will expand if
left in a sealed container, resulting in
excessive pressure buildup that can
pose a risk of injury. For ingredient
storage in the cup, use only Spout Lid
to cover.
42 The maximum wattage rating for
this appliance is based on the
configuration of the Pro Extractor
Blades Assembly and Single-Serve
Cup. Other configurations may draw
less power or current.
43 DO NOT submerge the motor base
or control panel in water or other
liquids. DO NOT spray motor base or
control panel with any liquid.
SAVE THESE INSTRUCTIONS
44 DO NOT attempt to sharpen blades.
45 Turn the appliance OFF, then unplug
the appliance from the outlet when
not in use, before assembling or
disassembling parts, and before
cleaning. To unplug, grasp the plug
by the body and pull from the outlet.
NEVER unplug by grasping and
pulling the flexible cord.
46 Turn off the appliance and unplug the
®
motor base before cleaning.
ninjakitchen.com
7