Brandt WTD 1276 Guide D'installation & D'utilisation page 25

4 / PROGRAMMING YOUR MACHINE
•Full programming
— ... Or select a start delayed by 1 - 19 hours by using button
option and then using button
•Programming a Drying Only cycle:
— Press in the "On/Off" button
— Turn the selector 1
suit your type of washing
— Select the "
" (Easy ironing) option, or not. This option finishes your
programme with a 2 hour "Resting" period (see "Details of the options")
— Set the desired time via button
least at 800 rpm)
— Select immediate start by pressing the "Start/Pause" button
— ... Or select a "Delayed start" via buttons
•Adding or removing an item during the cycle
— Press the "Start/Pause" button
— Add or remove the items of laundry*.
— Press the "Start/Pause" button
(*) The lid may take 1-2 minutes to unlock
NB: If you have selected a "Delayed Start", you can instantaneously access
the drum at any time during the phase before the washing cycle starts,
without having to interrupt and restart the cycle.
Cancelling during programming or washing or during a pause:
— Hold down the "Start/Pause" button
This can be done at any time during the cycle or during programming, or
even during a pause.
NB: If you do this while the machine is waiting to start during a delayed
start, only the delayed start is cancelled.
•End of the cycle:
— At the end of the cycle, the display shows "- 0 -".
Release the "On/Off"
device to unlock the lid.
NB: To aid access to your washing, the opening to the drum is automatically
positioned at the top.
•Maintaining your machine's performance:
— At the end of the cycle, you must clean the drying filter (see the Chapter "MAINTAINING YOUR
MACHINE: Cleaning the drying filter").
:
(continued)
R to set the period of the delay.
I / O
.
to select a heavy or gentle drying programme to
R (only dry washing that has been spun at
3
2 to interrupt the cycle.
2 to restart the cycle.
2 for at least 1 second.
I / O
button and wait 1-2 minutes for the safety
3 to select this
2 ...
and . R
(impossible during spin):
25
Lights and/or display
Light
+ display of time remaining
before the cycle starts A
Light
and options chosen
+ e.g.
Light
+ display of the remaining
A
cycle time on
or display of time remaining
before the cycle starts A
Flashing light B
+ counter A stopped
Light B permanently lit
+ counter A restarts
Return to initial display
EN