Programming - Brandt WTD 1276 Guide D'installation & D'utilisation

EN 4 / PROGRAMMING YOUR MACHINE

•PROGRAMMING

Type of washing and
temperature
Start / Pause
Spin speed, drying time
and delayed start setting
Information:
All the buttons are on micro-switches and do not remain depressed.
If one of the cycle progress lights is lit when you switch on, cancel before carrying out any other
operation.
In any case, the "On/Off" button cannot cancel a programme.
•Full programming
— Press in the "On/Off" button
— Turn the selector
temperature. The machine proposes the recommended spin speed for the
type of textile selected.
— Use the setting button
- Either to alter the proposed spin speed. (If you programme for
sequenced drying, select the highest spin speed possible).
- Or to select drip dry.
The cycle will finish with a gentle spin at 100 rpm.
- Or to select stopping with the drum full of water.
The machine will stop with the drum full of water before the final spin.
— Use the buttons
4
— Select a subsequent drying via button
desired drying time (for the washing load to be dried, see the Programmes
table).
— Select immediate start by pressing the "Start/Pause" button
Cycle progress
1 B
2 R 3
(combined with drying or not)
I / O
.
1
to select the programme and the washing
R
:
to select any options you wish.
Display
A
4
Options
Selector for the spin speed, drying and
delayed start functions
:
3 then, via button R
2 ...
24
On/Off
I /O
Lights and/or display
Light
+ spin speed
recommended on
Light
+ e.g.:
or
or
Lights
and options chosen
+ programme end selected
, set the
Lights
chosen +
+ e.g.:
Light
+ display of washing time
remaining A
A
A
on
and options
on A