Getting to know your phone
Installing the SIM card and
battery
Before you can start exploring your new
phone, you'll need to set it up. To insert the
SIM card and battery:
1
To remove the battery cover, hold the
phone firmly in one hand. With your other
hand, lift off the battery cover with your
index finger as shown in figure.
2
Slide the SIM card into its Respective
slots as shown in the figure. Make sure
the gold contact area on the card is
facing downwards.
SIM2
16
SIM1
3
Insert the battery into place by aligning
the gold contacts on the phone and the
battery (1) and pressing it down until it
clicks into place (2).
4
Align the battery cover over the battery
compartment (1) and press it down until it
clicks into place (2).