Alternate Input - Siemens VersiCharge Manuel D'installation

Table des Matières

Les langues disponibles

• Verify that the VersiCharge is in the 'Power Available' state by

ensuring that only the 'Power' indicator is illuminated.

• Press and hold both the 'Pause' button and the 'Delay Timer' button for

5 seconds. The halo will blink green three times, and fade out to off.

• To re-activate, press and hold both the 'Pause' button and the

'Delay Timer' button for 5 seconds. The halo will fade in from off

and then blink green three times.

4.7 Alternate input

An Alternate input can be used to control the VersiCharge. Examples

include demand response switches, building automation systems, digital

sensors, etc.

• Wire a digital input into the dry contact located in the connection area

inside the VersiCharge. See installation Section 3.6 for installation

details.

• When this external contact is closed, the alternate input will control the

VersiCharge, preventing it from entering the 'Charging' state.

• There is no override capability at the VersiCharge, so if a user would

ever want to use the VersiCharge during an auxiliary control event,

other override methods are required.

Document Number: 813540

- 29 -

Table des Matières

Table des Matières