Publicité
Les langues disponibles
Les langues disponibles
c. Mounting the dust extraction tube (Fig. 5)
Fig. 5
!
Always connect the dust extraction when sanding.
To install the dust extraction, put the dust extraction system onto the
machine.
Use the Velcro tape to fasten it with the tool.
WARNING
d. LED worklight (Fig. 6)
Fig. 6
e. Selecting the speed (Fig. 7)
Fig. 7
The tool has LED light to illuminate the
work area and improve vision when
working in areas with insufficient light.
The LED light will switch on automatically
while the on/off switch is turned on.
With the speed controller, the rate of
oscillation can be selected (also during
operation). Rotate the speed controller to
choose the suitable speed.
The optimum speed depends on the
material and should be determined by
carrying out a practical test.
•
Stage 1: slow
Stage 6: quick
Publicité
