14. Only use application accessories in good condition. Do not use them if they are
torn or worn.
15. Do not touch the moving sanding sheet.
16. Do not treat the surface to be worked with solvent-containing fluids. Materials
being heated by the scraping can cause toxic vapors to develop.
17. Exercise extreme caution when handling the scraper accessory. The
accessory is very sharp; danger of injury.
18. Keep your hands away from the cutting area. Do not reach under the material
being cut.
19. The tool must be used only for its prescribed purpose. Any use other than
those mentioned in this Manual will be considered a case of misuse. The user
and not the manufacturer shall be liable for any damage or injury resulting
from such cases of misuse.
20. To use this tool properly, you must observe the safety regulations, the
assembly instructions and the operating instructions to be found in this
Manual. All persons who use and service the machine have to be acquainted
with this Manual and must be informed about its potential hazards. Children
and frail people must not use this tool. Children should be supervised at
all times if they are in the area in which the tool is being used. It is also
imperative that you observe the accident prevention regulations in force in
your area.
21. The same applies for general rules of occupational health and safety.
22. The manufacturer shall not be liable for any changes made to the tool nor for
any damage resulting from such changes.
23. Even when the tool is used as prescribed it is not possible to eliminate all
residual risk factors. The following hazards may arise in connection with the
tool's construction and design:
• Damage to the lungs if an effective dust mask is not worn.
• Damage to hearing if effective hearing protection is not worn.
• Hand-arm vibration syndrome if its use is not adequately managed.