Publicité
Les langues disponibles
Les langues disponibles
OPERATION
1. Before use
• Remove any packing material and loose parts from unit.
• Check the accessories before use. They should fit with the machine and your
purpose.
2. Functions
a. Attaching the application tool (Fig. 1)
Fig. 1
!
Check that the application tools are correctly attached. Incorrect or
insecurely fastened application tools can come loose during operation
and cause a hazard.
WARNING
1. Loosen the flange bolt with the hex key provided.
2. Ensure that the inner threads and the drive shaft are clean.
3. Align the grooves on the application tool with the four raised ribs on the drive
shaft; put the application tool onto the drive shaft.
4. With your gloved hand holding the blade, put on and tighten the flange bolt
using the hex key.
CAUTION: For all work or when changing
application tools, disconnect the tool from
power supply and always wear protective
gloves. The sharp edges of the application
tools will cause personal injury.
Application tools can be very hot while
working.
Publicité
