Menu - Siemens TE 6 Série Mode D'emploi

● With the grinding unit running, adjust the
selector 11 from fine (a: turn anticlock-
wise) to coarse (b: turn clockwise).
a
The new setting will not become
F
apparent until after the second cup of
coffee.
For dark roast coffee beans, choose
F
a finer grind, for lighter beans a
coarser grind.

Menu

The menu is used for changing individual
settings, accessing information and
launching processes.
● Touch A to open the menu.
In the display you will see the various setting
options, the navigation symbols light up. The
current setting is marked on the display.
Navigating through the menu:
= move down
I
B = confirm / store
= go back
F
A = open the menu /
exit from the menu
Touching I displays each setting
F
or selection option in order. After
you reach the lowest menu item the
topmost one is shown again.
b
For example:
Setting the coffee temperature to max. :
● Touch A. The menu is opened.
● Touch I repeatedly until the display
shows Coffee temperature.
● Touch B, the display shows e.g. high
● Touch I repeatedly until the display
shows max.
● Touch B to store the setting. The
display shows the confirmation.
● The menu item Coffee temperature
appears.
● Touch F to exit from the menu.
You can specify the following settings:
Set cup size
Set up the volume dispensed for each drink
and each size of cup. The volumes set up in
the factory can be adjusted stepwise.
● Use I to choose a drink and touch
B to confirm your choice.
● Use I to choose the desired volume
and touch B to confirm your choice.
The setting is then saved.
Languages
Setting up the language to be used for
display texts.
● Use I to choose the desired
language and touch B to confirm
your choice.
Water hardness
Set this to the hardness of the local water
supply.
Level 1, 2, 3, 4 or Softening system can be
selected. The preset level of water hard-
ness is level 4.
● Use I to choose the desired water
hardness and touch B to confirm
your choice.
F It is important to set the water hard-
ness correctly, so that the appliance
indicates accurately when the
descaling programme should be run.
en
Menu
37