1.3
Specific safety instructions
1.4
Liabilities
7659613 - v02 - 08032017
Warning
In accordance with the NFC 15.100 electrical
safety standard, only qualified professionals are
permitted access to the inside of the appliance.
Warning
Ensure correct earthing.
Heating water and domestic water must not
come into contact with each other.
A disconnection device must be fitted to perma
nent pipes in accordance with installation rules.
If the power cable is damaged, it must be re
placed by the manufacturer, its after sales serv
ice or persons with similar qualifications in order
to obviate any danger.
This appliance must not be powered through an
external switch, such as a timer, or be connec
ted to a circuit which is regularly switched on
and off by the electricity provider.
Install the appliance in accordance with national
rules on electrical installation.
Wiring diagram: See chapter on Electrical Prin
ciple Diagram.
Connecting the appliance to the mains: See
chapter on Electrical Connections.
Fuse type et calibre: See chapter on Electrical
Connections.
Regarding information on installation on the ap
pliance, electrical connection and connection of
the water circuit, refer to the paragraphs below
in this manual.
Regarding information on handling, servicing
and scrapping the appliance, refer to the para
graphs below in this manual.
Note
In order to limit the risk of being scalded, the in
stallation of a thermostatic mixing valve on the
domestic hot water flow pipes is recommended.
1.4.1
Manufacturer's liability
Our products are manufactured in compliance with the
requirements of the various Directives applicable. They
are therefore delivered with the
en
1 Safety
marking and any
101