Error Messages - Insignia NS-FSDVDR Guide De L'utilisateur

Error messages

Error message
Disc Error
-- Please eject the disc. --
Playback may not be available on
this Disc.
Region Error
-- Please eject the disc. --
Playback is not authorized in your
region.
Parental Lock On
The current selected parental level
prohibits playback.
Recording Error
This program is not allowed to be
recorded.
Recording Error
This program is not recordable in
Video mode.
Recording Error
You cannot record on this disc.
Recording Error
This program is not allowed to be
recorded on this disc.
Recording Error
This disc is protected and not
recordable.
Recording Error
Disc is full.
(No area for new recording)
Recording Error
You cannot record more than 99
titles on one disc.
(The maximum is 99)
Recording Error
You cannot record more than 999
chapters on one disc.
(The maximum is 999)
Recording Error
You cannot record on this disc as
Control Information is full.
Recording Error
You cannot record on this disc as
Power Calibration Area is full.
Recording Error
The disc is already finalized.
48
Cause
• An unplayable disc is inserted in
the recorder.
• The disc is upside down.
• The DVD has a different region
code than the recorder, so the
recorder will not play the DVD.
• The parental control level that
you have set up in the recorder
prevents playback.
• The recorder encountered a
copy-protected program.
• You are trying to record a
copy-once program onto a
DVD-RW in Video mode.
• You are trying to record onto a
DVD which is not recordable, or
the DVD status is not compatible
with the recording requirements.
• The DVD is dirty.
• The DVD is damaged.
• You are trying to record the
copy-once program onto a
DVD-RW which is not
compatible with CPRM.
• You are trying to record on a
protected DVD (set in the Disc
menu).
• You are trying to record on a
DVD which has no space left for
recording.
• You are trying to record more
than 99 titles on a DVD.
• You are trying to record more
than 999 chapters on a VR mode
DVD-RW DVD.
• This DVD has no space to write
the control information when
recording or deleting contents.
• When editing has been done
repeatedly, the control
information area can fill up, even
though the recording area has
enough space.
• When recordings are performed
repeatedly onto an unstable
DVD, this area can fill up.
• Every time you insert a DVD for
recording, more of the DVD's
working area is used up. If you
do this frequently, you may not
be able to record a full 99 titles.
• You are trying to record onto a
DVD that has already been
finalized.
www.insignia-products.com
Insignia NS-FSDVDR DVD recorder
Solution
• Insert a standard disc in the recorder. See "Playable
discs" on page 16.
• Insert the disc with the label facing up.
• Insert a compatible DVD (region codes 1 or ALL) into
your recorder.
• Check the Parental lock setting (see Setting parental
controls" on page 26) and change if necessary.
• You cannot record copy-protected programs.
• Set the format to VR mode (see "Formatting a blank
DVD" on page 29).
• Insert a recordable DVD and make sure that the DVD
status satisfies the recording requirements.
• Clean the DVD with a cleaning cloth.
• Replace the DVD.
• Insert a DVD-RW in VR mode (ver.1.1 or 1.2
compatible with CPRM).
• Release the Disc Protect setting in the Disc menu
(see "Protecting a DVD" on page 33).
• Insert a recordable DVD with enough recording
space.
• Delete unnecessary titles. See "Deleting titles (Video
mode)" on page 34 or "Deleting titles (VR
mode/Original list)" on page 35.
• Delete unnecessary chapter markers. See "Adding or
deleting chapter marks (Video mode)" on page 38.
• Delete unnecessary titles. See "Deleting titles (Video
mode)" on page 34 or "Deleting titles (VR
mode/Original list)" on page 35.
• Insert a new DVD.
• Release the finalization for this DVD (see "Finalizing a
DVD" on page 33).