Playback; Recording,Timer Recording,Editing - Insignia NS-FSDVDR Guide De L'utilisateur

Playback

Problem
The disc does not play.
Playback image freezes for a
second.
The DVD does not start
playback from the
beginning.
The disc starts playback
automatically.
Some functions, such as
stop, search, or slow
playback, do not work.
Cannot change the
soundtrack language.
Cannot change the subtitle
language or cannot turn off
subtitles.
46
Solution
• Make sure that there is a disc
in the disc tray.
• Make sure that the disc is not
blank.
• Make sure that the disc is in
the disc tray with the label
facing up.
• Your DVD player cannot play
certain discs, such as
CD-ROMs.
• The DVD's region code must
be 1 or All. Your recorder's
region code is 1. The region
code is usually on the DVD or
DVD packaging.
• If moisture has condensed
inside your recorder, remove
the disc and leave your
recorder turned on for about
two hours until the moisture
evaporates.
• If the DVD was recorded on
another recorder, make sure
that the DVD was finalized. If
the DVD has not been
finalized, your DVD player
cannot play it.
• When playing a two-layered
DVD, the picture may freeze
for a second or two when
your recorder switches from
the first layer to the second
layer. This is not a
malfunction.
• If you stop playback by
pressing STOP , then press
PLAY , your recorder begins
playback at the point where
you stopped. To start
playback at the beginning of
the DVD, press STOP
then press PLAY .
• Some DVDs display the title
menu as soon as you insert
them.
• Some discs are programmed
to start playback
automatically.
• Depending on the disc, you
may not be able to perform all
functions. Check the disc's
documentation.
• Not all DVDs have multiple
languages.
• Some DVDs only let you
change the language from the
DVD menu. Open the DVD
menu, then select a language,
if available.
• Not all DVDs have subtitles.
• Some DVDs only let you
select a subtitle language
from the DVD menu. Open
the DVD menu, then select a
subtitle language, if available.
• Some DVDs do not let you
turn off subtitles.
www.insignia-products.com
Problem
Cannot change the angle.

Recording,timer recording,editing

Problem
The channel cannot be
changed from the channel
you are currently recording.
Recording does not start
immediately after you press
REC/OTR.
Nothing was recorded, even
though you set the timer
correctly.
twice,
Recording does not stop
immediately after you press
STOP .
Timer recording was not
completed or did not start
from the beginning.
Insignia NS-FSDVDR DVD recorder
Solution
• Not all DVDs have multiple
angles recorded on them.
• The current portion of the
DVD may not contain a
multi-angle view. The angle
may change when the
multi-angle portion is played.
• The DVD may prohibit
changing angles.
• Try changing the angle using
the DVD's menu.
Solution
• Set the TV's input to TV.
• There is no unused DVD-R or
DVD-RW inserted in the
recorder. After inserting a
recordable DVD-RW, it takes
a while for your recorder to
automatically format it.
• There was a power failure
during recording.
• The recorder's internal clock
stopped due to a power
failure that lasted for more
than 30 seconds. See
"Automatically setting the
clock" on page 14.
• Disconnect the AC power
cord from the AC power
outlet, then connect it again.
• The program contains copy
protection that restricts
copying.
• The timer setting overlapped
with another setting that was
set later or that has priority.
• It takes a few seconds for the
recorder to input DVD data
before recording can stop.
• The timer setting overlapped
with another setting that was
set previously or that has
priority.
• There was not enough space
on the DVD.