Adjusting Dolby Digital Audio; Using Dynamic Range Control - Insignia NS-FSDVDR Guide De L'utilisateur

Insignia NS-FSDVDR DVD recorder
7 Press or to select an option, then press
ENTER.
• 48kHz—Select this option if your amplifier
or decoder is not compatible with 96 kHz
PCM. With this setting, 96 kHz sound is
output at 48 kHz.
• 96kHz—Select this option if your amplifier
or decoder is compatible with 96 kHZ
PCM.
8 Press SETUP to close the menu.

Adjusting Dolby Digital audio

If your recorder is connected to a Dolby Digital
sound system, you can adjust the audio.
To adjust the Dolby Digital audio:
1 If a DVD is playing, press STOP .
2 Press SETUP. The Setup menu opens.
3 Press or to select Playback, then press
ENTER. The Playback menu opens.
4 Press or to select Audio, then press
ENTER. The Audio menu opens.
Audio
Digital Out
Dynamic Range Control
5 Press or to select Digital Out, then
press ENTER. The Audio - Digital Out screen
opens.
Audio - Digital Out
P C M
D o b l y D g i t i l a
ON

Using Dynamic Range Control

4 8 k H z
t S e r a m
www.insignia-products.com
6 Press or to select Dolby Digital, then
press ENTER. The Digital Out - Dolby Digital
screen opens.
Digital Out - Dolby Digital
PCM
Stream
7 Press or to select an option, then press
ENTER.
• PCM—Select this option if your amplifier
or decoder is not compatible with Dolby
Digital. Dolby Digital audio is converted
into PCM (2-channel) audio.
• Stream—Select this option if your
amplifier or decoder is compatible with
Dolby Digital audio.
8 Press SETUP to close the menu.
Note
When playing a DVD-RW recorded in VR mode:
If the audio source on a DVD is Dolby Digital
format, set Dolby Digital to PCM so that you can
switch to main (L), sub audio (R), or a mix of both
(L/R) with your amplifier or decoder.
The Dynamic Range Control feature
compresses the range between the loudest and
softest sounds.
To use Dynamic Range Control:
1 If a DVD is playing, press STOP .
2 Press SETUP. The Setup menu opens.
3 Press or to select Playback, then press
ENTER. The Playback menu opens.
4 Press or to select Audio, then press
ENTER. The Audio menu opens.
Audio
Digital Out
Dynamic Range Control ON
25