Displaying Status Information; Playing Dvds And Cds; Playable Discs; Color Television Standards - Insignia NS-FSDVDR Guide De L'utilisateur

Displaying status information

To display status information:
• While a disc is playing, press DISPLAY.
Information about the disc is displayed.
1 Indicates the disc type and format mode.
2 Indicates the channel number.
3 Indicates the title number, chapter number,
and elapsed playing time.
4 Indicates the current active feature. Icons
mean:
—Search
—Audio
—Subtitle
—Angle (except VR mode)
—Repeat
—Marker
—Noise Reduction
—Zoom
—Surround
5 Indicates current disc mode, for example
stop mode.
6 Indicates the recording mode and possible
recording time left.
16

Playing DVDs and CDs

Playable discs

Discs that have the following logos will play on
the this recorder. Other disc types are not
guaranteed to play.
Disc
DVD-VIDEO
DVD-RW (VIDEO/VR mode)
DVD-R (VIDEO mode)
CD-DA (AUDIO CD)
CD-RW (CD-DA FORMAT)
CD-R (CD-DA FORMAT)
MP3
WMA

Color television standards

DVDs are recorded in different color television
standards throughout the world. The most
common standard is NTSC (used primarily in the
United States and Canada).
This recorder uses the NTSC system, so DVDs
you play must be recorded in same system. You
cannot play DVDs recorded in other color
system.

Region codes

This recorder has been designed to play only
those DVDs encoded for Region One (1) or ALL.
A DVD labeled for a specific region can only play
on a DVD player configured with the same
region code. You cannot play DVDs that are
labeled for other regions.
Look for the globe symbols on DVD cases (the
number inside the globe refers to the region of
the world). If these region symbols do not
appear on your DVD case, you cannot play the
DVD in this recorder.

Playing a DVD or CD

The following instructions are for playing a
pre-recorded DVD that you buy or an audio CD.
To play a DVD formatted in Video or VR mode,
see "Playing a DVD formatted in Video or VR
mode" on page 17.
To play a DVD or CD:
1 Turn on the TV and your recorder.
2 On the TV, select the video source that your
recorder is connected to. For a list of
common video sources by TV brand, see "TV
video input sources" on page 12.
3 Press OPEN/CLOSE
4 Insert a DVD into the tray with the label
facing up.
www.insignia-products.com
Insignia NS-FSDVDR DVD recorder
Logo
MP3
WMA
to open the disc tray.