Using One-Touch Recording; Setting Up A Timer Recording - Insignia NS-FSDVDR Guide De L'utilisateur

Insignia NS-FSDVDR DVD recorder

Using One-Touch recording

You can quickly set the amount of time you want
your recorder to record before it stops recording
and goes into standby mode.
To use One-Touch recording:
1 Press OPEN/CLOSE
2 Insert a formatted DVD with enough space
for the recording into the tray, with the label
facing up.
3 Press OPEN/CLOSE
Your recorder reads the disc. This may take
a while.
4 Press REC SPEED to select a recording
speed.
5 Press CH or CH
buttons to select the channel you want to
record.
6 Press REC/OTR repeatedly to select the
amount of time you want to record. Each time
you press the button, the recording time
increases by 30 minutes up to 8 hours.
Recording begins immediately. When the
recording is complete, your recorder stops
recording and goes into standby mode.
7 To change the amount of recording time,
press REC/OTR repeatedly until the time you
want appears.
8 To cancel the recording before the time runs
out, press STOP .
Notes
Press DISPLAY to view the remaining recording
time.
You cannot pause a One-Touch recording.

Setting up a timer recording

You can schedule as many as eight recordings
within a month. You can also schedule daily and
weekly recordings.
To set up a time recording:
1 Make sure that the clock is set. For more
information, see "Automatically setting the
clock" on page 14 or "Manually setting the
clock" on page 14.
2 Insert a formatted disc into the disc tray, then
close the tray.
3 Press TIMER PROG. The Timer
Programming screen opens.
Timer Programming
Date Start
1. ---
2. ---
3. ---
4. ---
to open the disc tray.
to close the disc tray.
or press the number
End CH Speed
www.insignia-products.com
4 Press or to select a program number,
then press ENTER.
Timer Programming
Date Start End
1. JAN/01 --:-- --:--
2. ---
3. ---
4. ---
5 Press or to enter the recording Date,
then press .
Timer Programming
Date Start End
1. JAN/01 12:57AM --:--
2. ---
3. ---
4. ---
6 Press or to enter the Start time, then
press .
7 Press or to enter the End time, then
press .
Timer Programming
Date Start End
1. JAN/01 12:57AM 1:57AM
2. ---
3. ---
8 Press or to select the channel number,
then press . To record from an external
device, select L1 (Line1) or L2 (Line2).
Timer Programming
Date Start End
1. JAN/01 12:57AM 1:57AM
2. ---
9 Press or to select a recording speed.
CH Speed
L1
CH Speed
L1
CH Speed
CH 8
CH Speed
CH 8 1H
31