Sound; Remote Control - Insignia NS-FSDVDR Guide De L'utilisateur

Insignia NS-FSDVDR DVD recorder
Problem
Picture has noise or snow.
TV program picture does not
fill the screen.
TV program picture is
distorted.
Cannot change TV channels.
Playback picture is distorted.
Playback or TV program
from connected equipment
is distorted.
Solution
• The disc is dirty or flawed.
Clean the DVD or try another
DVD. For cleaning
information, see "Cleaning
discs" on page 44.
• If the video signal passes
through a VCR to get to your
TV or if your recorder is
connected to a TV/VCR
combination, the copy
protection on some DVDs
could affect picture quality.
Connect your recorder
directly to the TV or connect
your recorder using the
S-Video jack on the TV.
• Try a different channel.
• Re-scan for channels. For
more information, see
"Scanning for channels" on
page 13.
• If you are using an antenna,
adjust the antenna.
• Adjust the TV picture. For
more information, see the TV
user guide.
• Place your recorder and TV
farther apart.
• Place the TV and any
"bunched" antenna cables
farther apart.
• Replace the video cables with
a higher quality cable.
• If you are using an antenna,
make sure that it is connected
correctly and securely.
• Check the remote control
batteries and replace if
necessary.
• Make sure that your recorder
is not too close to devices
that may cause electrical
interference, such as a cell
phone.
• If the playback output from a
DVD player, VCR, or tuner
goes through your recorder
before it reaches the TV, the
copy protection on some
DVDs could affect picture
quality. Re-connect the device
directly to the TV.
www.insignia-products.com

Sound

Problem
There is no sound.
Sound has static.
No DTS sound is output.

Remote control

Problem
The remote control does not
work.
Solution
• The disc is dirty or flawed.
Clean the disc or try another
disc. For cleaning
information, see "Cleaning
discs" on page 44.
• Make sure that all cables are
connected correctly and
securely.
• Make sure that none of the
cables are damaged.
• Make sure that you have
selected the correct input
source on the audio system.
• Make sure that your recorder
is not in pause mode,
fast-forward, fast-reverse,
slow-forward, or
slow-reverse mode.
• Make sure that the audio
settings are correct. For more
information, see "Setting the
audio channel" on page 14.
• The disc is dirty or flawed.
Clean the disc or try another
disc. For cleaning
information, see "Cleaning
discs" on page 44.
• Your recorder is not
compatible with DTS sound.
Solution
• Make sure that there is not an
obstacle between the remote
control and the remote
control sensor on the front of
your recorder.
• Make sure that the remote
control batteries are good.
• Test the remote control to
make sure it is working. For
more information, see
"Testing the remote control"
on page 44.
• Make sure the antenna or
cable TV is connected
correctly and securely.
45