Berner BCS-86 Manuel D'utilisation page 18

E N G L I S H
Dust extraction (fi g. A)
Your tool is fi tted with a dust extraction outlet (5).
• Whenever possible, connect a dust extraction device
designed in accordance with the relevant regulations
regarding dust emission.
• Always use a vacuum extractor designed in
compliance with the applicable Directives regarding
dust emission when sawing wood. Vacuum hoses of
most common vacuum cleaners will fi t directly into
the dust extraction outlet.
Do not use a vacuum extractor without proper
spark protection when sawing metal.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your BERNER power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean the
housing with a soft cloth.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you fi nd one day that your BERNER product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re use of
recycled materials helps prevent environmental pollution
and reduces the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new
product.
BERNER provides a facility for the collection and recycling
of BERNER products once they have reached the end of
their working life. To take advantage of this service please
return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local BERNER offi ce at
the address indicated in this manual. Alternatively, a list
of authorised BERNER repair agents and full details of
our after-sales service and contacts are available on the
Internet at www.Berner-Group.com
GUARANTEE AND GUARANTEE SERVICE
Each tool, spare part or accessory is consistently
checked before being dispatched from the
manufacturing plant. If, despite this fact, there are
any defects, please send the item directly to our
Client Services Headquarters or to the nearest
service repair shop of the fi rm BERNER.
The guarantee period is 36 months and starts from
the day of purchase, which must be proved by
the original of the purchase document. During the
guarantee period the producer guarantees:
• free removal of possible defects;
• free replacement of all damaged parts;
• free professional servicing.
The requirement is that these are material and/or
manufacturing defects and that there has not
been any inappropriate operation [of the machine].
Furthermore, only original accessory parts may be
used, which BERNER has expressly identifi ed as
suitable for the operation with BERNER machines.
The addresses of repair workshops are given on the
reverse side.
18