The following items can be set (follow the page
reference for details):
"
" indicates the default settings.
z
Setup
Clock Adjust (page 4)
CT (Clock Time)
To set "on" or "off" (
Beep
To set "on" (
) or "off."
z
AUX-A*
1
(AUX Audio)
To turn the AUX source display "on" (
(page 14).
Display
Clock (Clock Information)
To display the clock and the display items/image
at the same time.
– "on": to display at the same time.
– "off" (
): to not display at the same time.
z
A.IMG (Auto Image)
Auto Image mode automatically steps (every 10
seconds) through the display images.
– "off" (
): to not change the image
z
automatically.
– "SA": to step repeatedly through the display
images of Spectrum analyzer.
– "Movie": to step repeatedly through the
display images of Movie mode.
– "All": to step repeatedly through the display
images in all display modes.
Info (Display Information)
To display the items (depending on the source,
etc.) at the middle of the display while a image
is displayed.
– "on" (
): to display the items.
z
– "off": to not display any items.
Dimmer
To change the brightness of the display.
– "Auto" (
): to dim the display automatically
z
when you turn lights on.
– "on": to dim the display.
– "off": to deactivate the dimmer.
Demo*
1
(Demonstration)
To set "on" (
) or "off" (page 4).
z
A.Scroll (Auto Scroll)
To scroll long displayed item automatically
when the disc/group/track is changed.
– "on": to scroll.
– "off" (
): to not scroll.
z
Receive Mode
Local (Local seek mode)
– "on": to only tune into stations with stronger
signals.
– "off" (
): to tune normal reception.
z
12
) (page 9, 10).
z
) or "off"
z
Mono (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– "on": to hear stereo broadcasts in monaural.
– "off" (
): to hear stereo broadcast in stereo.
z
Regional*
2
To set "on" (
) or "off" (page 10).
z
Sound
EQ7 Tune (page 11)
HPF (High Pass Filter)
To select the front/rear speaker cut-off
frequency: "off" (
), "78Hz" or "125Hz."
z
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off"
(
), "125Hz" or "78Hz."
z
Loudness
To enhance bass and treble at lower volume.
– "on": to reinforce bass and treble.
– "off" (
): to not reinforce bass and treble.
z
AUX Level
To adjust the volume level for each connected
auxiliary equipment (page 14). This setting
negates the need to adjust the volume level
between sources.
Edit
Name Edit (page 13)
Name Delete (page 13)
BTM (page 8)
*1 When the unit is turned off.
*2 When FM is received.
Using optional equipment
CD/MD changer
Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit
Disc
number
number
Playback starts.
* When MDLP disc is played.
LP2/LP4
indication*