Replacement Of The Valve Insert; Replacement Of The Valve Insert Without System Pressure; Replacement Of The Valve Insert Under System Pressure; Removal And Disposal - oventrop AQH Notice D'utilisation

Thermostatic valve AQH
7.3

Replacement of the valve insert

7.3.1

Replacement of the valve insert without system pressure

1. Depressurise the pipework.
2. Drain off the pipework.
3. Replace the valve insert (torque of 15 Nm, 19 mm spanner).
7.3.2

Replacement of the valve insert under system pressure

Replace the valve insert under system pressure with the help of the De-
mo-Bloc (see section 4 auf Seite 23; torque of 15 Nm, 19 mm spanner).
For further information please refer to the operating instructions
supplied with the Demo-Bloc.
8.

Removal and disposal

NOTICE
Risk of environmental pollution
Incorrect disposal (for instance with domestic waste) may lead to
environmental damage.
f Dispose of the components appropriately.
If no return or disposal agreement has been made, dispose of the product
yourself.
f Separate all components according to their material.
f If possible, recycle the components.
f Dispose of components which cannot be recycled according to local
regulations. Disposal with domestic waste is not permitted.
118309480-V01.05.2020
Removal and disposal
29