Environment - Festool RTSC 400 Li Notice D'utilisation D'origine

tool accessories and Festool consumable mate­
rial!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under "www.festoolusa.com".
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer". This pro­
vides protection and storage for the tool and ac­
cessories. The Systainers are stackable and
can be interlocked together. They also can be
interlocked atop Festool CT dust extractors.
To open the Systainer
Turn the T-loc [7-1] to this position.
To lock the Systainer
Turn the T-loc [7-1] to this position.
To connect two Systainers
Place one Systainer on the top of the other
(Fig. [7 A]).
Turn the T-loc [7-1] to one of this po­
sitions (Fig. [7 B]).
The Systainers are connected and locked.
A new generation Systainer is con­
nectable on top of a previous genera­
tion Systainer by the four latches of
the previous Systainer.
A
B 7.1

12 Environment

Do not dispose of the device as domestic
waste! Dispose of machines, accessories and
packaging at an environmentally responsible
recycling centre. Observe the respective nation­
al regulations.
Battery Disposal
WARNING
Risk of fire or injury
► Do not attempt to disassemble the battery
or remove any component projecting from
the battery terminals.
► Prior to disposal, protect exposed termi­
nals with heavy insulating tape to prevent
shorting.
English
7
15