Vanes; Lubrication; Replacing The Silencer; Accessories, Tools - Festool LRS 400 Guide D'utilisation

Customer service and repair only
through manufacturer or service
workshops: Please fi nd the near-
est address at:
www.festoolusa.com/service
Use only original Festool spare
parts! Order No. at:
www.festoolusa.com/service
We recommend that the vanes on the motor be
replaced after approx. 500 operating hours.

Lubrication

If the machine is not used for longer periods, e.g.
for a weekend, introduce 1 or 2 drops of lubricat-
ing oil into the compressed-air supply [3-1] on the
machine prior to use.

Replacing the silencer

The silencer on the IAS connecting piece must
be replaced at regular intervals to maintain the
power of the pneumatic tool.

Accessories, tools

Use only original Festool acces-
sories and Festool consumable material intended
for this machine because these components are
designed specifi cally for the machine. Using ac-
cessories and consumable material from other
suppliers will most likely affect the quality of your
working results and limit any warranty claims.
Machine wear or your own personal workload may
increase depending on the application. Protect
yourself and your machine, and preserve your
warranty claims by always using original Festool
accessories and Festool consumable material!
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
www.festoolusa.com.

Environment

Do not dispose of the device together with do-
mestic waste! Dispose of machines, accessories
and packaging at an environmentally responsible
recycling centre. Observe the valid national regu-
lations.

Vanes

10