Festool RTSC 400 Li Notice D'utilisation D'origine page 12

English
Sanding work
– Intermediate sanding of
paintwork on stained surfa­
ces
– Cleaning natural wood win­
dow rebate using sanding
cloth
– Sanding stained edges
– Sanding of thermoplastics
8.2 Changing sanding pad [4a]
An optimal work result can only be ach­
ieved using original accessories and con­
sumables. The use of non-original accessories
or consumables invalidates the right to claim
under warranty.
3
DTS 400 REQ
12
Adjusting wheel setting
2-3
1-2
3
RTS 400 REQ
If the StickFix coating on the sanding pad has
worn out, the entire sanding pad can be re­
placed:
Undo the four screws.
Remove the sanding pad by pulling it down­
wards.
Attach the new sanding pad.
Use four screws to tighten it by hand
(2.5 Nm).
8.3 Attaching sanding accessories using
StickFix [4b]
The suitable StickFix sandpaper and StickFix
sanding cloth can be attached quickly and sim­
ply to the StickFix sanding pad.
► Affix the self-adhesive sanding accessory to
the sanding pad.