Num'axes PIE 1010 Guide D'utilisation page 34

Piège photographique / Trail camera # PIE 1010 – Guide d'utilisation / User's guide – indice A
SMTP settings
Enter press OK to enter
Auto input - allows you to use pre-programmed parameters. You
will have to select your country and mobile phone network operator.
Enter press OK
press OK choose your mobile phone network operator using the
and keys press MENU several times to move back
Limited pre-programmed parameters are available in SMTP. You will
have to use the "Manual input" option (see below) to input the
sender's email parameters. Do not hesitate to check the settings with
your mobile phone network operator.
Manual input – allows you to manually enter the SMTP parameters
(APN, Account, Password, SMTP server, Port, Sender email, Send
password).
Note: if you choose to manually input the SMTP parameters, you
need to contact your mobile phone network operator to have them
provide all the required information.
Mobile no. – allows you to input the mobile phone number that can
control the camera with the SMS commands. Make sure to enter only
numbers (do not include any spaces or dashes).
Enter Phone number 1
your choice press MENU to move back
Email – allows you to input the email addresses that will receive data
from the camera. You can enter up to 4 email addresses.
Enter Email 1 to 4
press MENU to move back
SMTP Manual Test – allows you to send an email manually for
testing.
Before starting the test, please make sure the SIM and SD cards are
inserted, the SMTP parameters are set correctly and the SMTP status
is not set to OFF.
You must allow your camera time to search for cellular service. After
the mobile signal shows on the LCD, your can begin the test.
Enter Press OK to start the test. The camera will take a picture
automatically meanwhile the LCD will show a timer start to count the
transmitting time. Then a message on the LCD display will indicate if
the test is successful or not.
If the test failed check the camera settings and, if necessary, contact
your mobile phone network operator to verify the wireless related
data are correct.
choose your country using the
press OK to input the phone number of
press OK to input email of your choice
and keys
34/40