Test Menu - Parameters And Settings List - Num'axes PIE 1010 Guide D'utilisation

Piège photographique
Masquer les pouces Voir aussi pour PIE 1010:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.4.
TEST menu – parameters and settings list
You will find hereunder tables listing all of the parameters found in the TEST menu, along with
their possible settings (or range of settings), and a description of what the parameter controls
and what the settings do.
The default settings for each parameter are indicated in bold type.
Put the power switch in the TEST position then press MENU to enter into the setting menu.
Settings
Select language
Camera settings
SMTP/MMS settings
Camera settings:
Mode
Photo resolution
Video resolution
Series images
Video length
Beep sound
Set clock
Piège photographique / Trail camera # PIE 1010 – Guide d'utilisation / User's guide – indice A
Choose the language you need
Customize the camera settings
Set the parameters to send the photos
Camera, Video, Camera + Video
The camera has a sound recording function, so the sound will be
embedded in the video clips while capturing videos.
In "Camera + Video" mode a still photo and a video clip are both
captured for each trigger.
5M, 12M, 8M
Selects resolution for still photos from 5 to 12 megapixels. Higher
resolution produces better quality photos, but creates larger files that
take up more of the SD card capacity (fills up faster).
720P (1280x720 - HD), VGA (640x480), 1080P (1920x1080 – FHD)
Selects video resolution (in pixels per frame). Higher resolution
produces better quality videos, but creates larger files that take up
more of the SD card capacity (fills up faster).
1 Photo, 2 Photos, 3 Photos
Selects how may photos are taken in sequence per trigger in Camera
mode.
10 seconds, 20 seconds, 30 seconds, 60 seconds.
Sets length per captured video clip.
NOTE: You need to double the time interval from what your video is
set on. Example: 20 seconds video length, your trigger interval needs
to be at LEAST 40 seconds.
ON, OFF
You can choose to hear a beep sound or not when you press a key
Press OK to enter then use the
the  or
key to move to the next field. The date default format is
YY/MM/DD (year/month/day).To change the date format, press the
key several times to highlight YY then press the
available choices (YY/MM/DD, MM/DD/YY, DD/MM/YY).
The time format is hour:minute:second.
Description
or
key to change the setting and
key to see the
29/40

Publicité

Chapitres

Table des Matières
loading

Table des Matières