Ndustrio 191PD1G Manuel D'utilisation Et D'installation page 46

REPLACEMENT OF THE PILOT LIGHT INJECTOR
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Open the hatch (A).
3 - Unscrew the union (B).
4 - Remove the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Screw the union (B) back in place and close the
hatch (A).
DECOMMISSIONING THE APPLIANCE
Important
This operation must be carried out by
skilled operatives in compliance with
the legal requirements with regard to
safety at work. Never dump non-biodegrad-
able materials, lubricating oils and non-me-
IT
GB
DE
FR
ES
English
A
tallic components (rubber, PVC, resins,
etc.) in the environment. Dispose of them in
accordance with the relevant legal require-
ments.
- 22 -
B
C
IDM-39615402100.tif