Ndustrio 191PD1G Manuel D'utilisation Et D'installation page 39

A variety of optional installation kits are available for
arranging appliances in banks:
H)"Bridge" installation kit
H
WATER CONNECTION
To make the connection, connect the mains line to
the appliance's connection pipe, fitting a shut-off
tap (A), to allow the water supply to be cut off when
necessary. Easily accessible filters must be fitted
downstream of the tap.
Description
Pressure
pH
Conductivity
Hardness
Salt and metallic ion
content
Chlorides
Sulphates
Iron
Copper
Manganese
L
Value
200÷450 kPa (2÷ 4,5 bar)
7÷7.5
< 200 mS/cm
9÷13° f (5÷7° d, 6.3÷8.8° e,
90÷125 ppm)
< 30 mg/l
< 40 mg/l
< 0,1 mg/l
< 0.05 mg/l
< 0,05 mg/l
- 15 -
L) Supporting frame kit
M)Supporting beam kit
A
Important
The appliance must be supplied with
drinking water having the characteristics
shown in the table.
M
IDM-39614401800.tif
IT
GB
DE
FR
ES
IDM-39614901400.tif
English