Control Panel; Connector Panel - Sony VPL-CS5 Mode D'emploi

Control Panel

ACCESS
AUDIO
INPUT A
ACCESS
AUDIO
5
1
POWER SAVING indicator
Lights up when the projector is in power
saving mode. When "Power Saving" in
the SET SETTING menu is set to "ON,"
the projector goes into power saving
mode if no signal is input for 10 minutes.
Although the lamp goes out, the cooling
fan keeps running. The power saving
mode is canceled when a signal is input
or any key is pressed. In power saving
mode, any key does not function for the
first 60 seconds after the lamp goes out.
2 MENU key
Displays the on-screen menu. Press
again to clear the menu.
3 Arrow keys (f/F/g/G)
Select the menu or to make various
adjustments.
4 ENTER key
Enters the settings of items in the menu
system.
12
GB
Location and Function of Controls
POWER
SAVING
INPUT A
MENU
PUSH
ENTER
VIDEO S VIDEO
TEMP/FAN
LAMP/COVER
1
POWER
SAVING
MENU
2
PUSH
ENTER
VIDEO S VIDEO
TEMP/FAN
3
LAMP/COVER
4
6
5 TEMP (Temperature)/FAN
indicator
Lights up or flashes under the following
conditions:
– Lights up when temperature inside the
projector becomes unusually high.
– Fashes when the fan is broken.
For details, see page 41.
6 LAMP/COVER indicator
Lights up or flashes under the following
conditions:
– Lights up when the lamp has reached
the end of its life or becomes a high
temperature.
– Flashes when the lamp cover or air
filter cover is not secured firmly.
For details, see page 41.

Connector Panel

1
2
3
4
5
ACCESS
AUDIO
6
7
1 INPUT A connector (HD D-sub
15-pin, female)
Connect to external equipment such as a
computer.
Connects to the monitor output on a
computer using the supplied cable.
When inputting a component or 15k
RGB signal, use an optional cable.
For details, see "To connect a 15k RGB/
Component equipment" on page 20.
2 USB connector (USB plug for
upstream, 4-pin)
Connect to the USB connector on a
computer. When you connect the
projector to the computer, you can
POWER
SAVING
INPUT A
MENU
PUSH
ENTER
VIDEO S VIDEO
TEMP/FAN
LAMP/COVER